DIY Colorblock Belt

I own ONE belt. Seriously. One. Sadly, that one belt has gone through a lot and is starting to fall apart (it also has some bright yellow paint splatter on it...occupational hazard).
Instead of getting rid of it, I decided I would spruce it up with some embroidery thread and show you how you can do it too!

DIY Colorblock Belt

What you will need:

• An old belt
• Scissors
• Embroidery thread (The amount and colors you get are up to you. I would suggest getting one of those mixed bags with lots of colors in it-- they're about $5)
• Elmer's Glue (optional)

  Start by wrapping the your embroidery thread around the belt, keeping it tight and as close to the buckle as possible.
**Before you knot it, take a second and decide how long you want this section of color to be, and make sure the tail of your knot (the part that is normally cut off) will be about an inch or two longer than that section of color.**
The reason for this is that we will be using the end of that tail to begin the next section of color. You can see I didn't do that in this first picture... when I started the belt I had planned on doing it a different way, but I found that the way I described ends up being much easier and the inside of the belt will look much better, too.

Start wrapping your belt in the embroidery thread, making sure to keep it very tight to the belt, and making sure not to have any gaps or overlapping thread. Keep the tail of your knot underneath the wrapped thread, on the inside of the belt, like this: 

When you're satisfied with that section, you should still have some tail hanging out. Use that to start the next color... wrap the next color around the belt the same way you began the first one, but this time you will knot it WITH the tail. Remember to keep enough length in the new tail for that particular section of color. Then, continue wrapping just like before, still keeping the tails underneath. 

This is what the inside of your belt should look like:

Repeat this along the entire belt, with each new color. 

This part is going to take awhile. I was wrapping thread for hours!

When you're at the end, simply knot it twice, cut off the tail, and dab a tiny dot of regular Elmer's Glue onto the knot to help keep it secure.

That's it! 

Now that you know how to make a bitchin' new belt, I wanted to show you some things I've made recently.

First up is this painting that I finished last night. I began the background without having any idea what it was going to turn into. If you look at it up-close, the background looks sort of like a stormy sea. The picture does it no justice.
The writing is a line from U2's song, "Beautiful Day"
I mainly wanted to show this because I'm proud of the improvement in my lettering. That is a huge weak area for me, my lettering tends to look awkward and unbalanced. I am happy with the final result of this one though!

Next up is another painting I did a couple days ago, I just wanted to show it because it was so darn cute. I found a design online that was somewhat similar to this, (I wish I had saved the page, but I didnt), but I tweaked it and made it my own. I'm very happy with the end result. 

I did an adorable polka dot mani, which I will have a tutorial on next week. Stay tuned for that!!

 I also started working on clay Mario characters as jewelry charms and earrings. This is my first batch. Definitely not perfect, but I think it's pretty damn good for my first try! :)

In addition to the Mario charms, I whipped up some bacon earrings, too! Anyone hungry??  These were so fun and easy to make. A friend suggested that I make some sunny side up eggs to go with it, and I shall. 

That's all for now, thanks for reading this far. ;)

xoxo,
Meagan

A quick post before we hit the road...

Shane and I are going to leave for Cedar Rapids in a couple hours, so I thought I'd take this little bit of downtime I have to share with you some of the things I worked on this week. 


First, I finished up a couple Christmas presents... 


For Madyson (14 yrs old), I bought a little wooden drawer thingy at Michael's. Her room is painted hot pink and neon green, so those are the colors I painted it. Around the polka dots and on the neon green knobs, I painted on some glow-in-the-dark paint. :) 
(oh, and sorry about the color variation in the pictures, I used two different settings on my camera when taking these. but the true colors are the bottom picture with the flash.)

For Jake, a very adventurous kid who loves playing with Lego's and creating his own little worlds, I bought a wooden castle thing from Michael's and painted it. I love the treasure chest and the skeleton bones on the back. :) 

gold dubloons!

I also made a T-shirt for Jake. My friend Cathy and I tried this technique last summer on a few black t shirts and tank tops. 

Here is a quickie tutorial for you: 

Materials: 

T-Shirt (dark colored)

Bleach-water (you can dilute it however you like, the best solution I've found is about 70% bleach 30% water. This time, however, I used a much more diluted mixture that wasn't nearly as potent.)

duct tape

spray bottle

cardboard

A WELL-VENTILATED AREA

Start with a dark-colored shirt, preferably black or navy blue. 
I bought this navy blue shirt from Target. 
Tape off whatever design you like on the front and/or back with duct tape. 

After taping it off, you will want to tape something like cardboard to the hanger the shirt is on so the bleach won't seep through to the other side.


Spray your t-shirt (in a well-ventilated area!) with the bleach-water, and see the colors change right before your eyes! 
(using some pics from last summer, since I forgot to take a few this time!)

Cathy spraying her tank top.

after being sprayed. you can see the result of my t-shirt
after the duct tape was removed! 

And the result of Jake's T-shirt from today: 

went from navy blue to gray!

Shane's mom has also been making Christmas ornaments, and of course I had to help glitterize them! ;) 

sparklyyyyy.

To make these ornaments, blow up a balloon slightly to a small round shape. (don't use helium quality balloons. you want them to be nice and round.) 
Take cotton string (looks similar to hemp) and cover it in either Elmer's Glue, Mod Podge, or starch. This one, I believe, was done with Elmer's. Wrap the string repetitively around the balloon,to your liking. tuck the end of your string into the top at a secure enough spot and let it dry.
When it is finished drying, pop the balloon, and take care of any leftover glue that may have stuck onto the string. 
Once it looks clean, use spray adhesive (or mod podge could work too) and cover the string in it. 
Then, glitter it up!! Let it hang to dry overnight. 


Enjoy, and have a Merry Christmas, crafters!! 
<3 Meagan.

Christmas Ornaments!

Update: I know I posted the other day about my grandpa and his failing health, well, this morning Charles Kenneth Lane passed away peacefully in his sleep. He will be missed terribly by his friends and family. R.I.P Grandpa Lane. 

It has been such a sad day, and Shane went to work this morning so I haven't really had anyone to talk to. So, instead of lying in bed and grieving all day, I decided to do some creating to get my mind off things. 

Today, I made Christmas ornaments. This is a great project for kids and adults alike, and very inexpensive!

I started off using these materials: 

paper towel roll, elmer's glue (i eventually switched to my hot glue gun)
glitter, a pen, scissors, ruler, clothespins, Mod Podge

First, cut the paper towel roll into quarter-inch strips. 

Once it is cut up, glue the strips together forming a star. Now, I tried each ornament out a different way. First, I just used Elmer's Glue... if you're using Elmer's glue, make sure that you use the clothespins to hold the pieces together in the star shape until it dries. (I also did a few with my hot glue gun, and that worked MUCH MUCH BETTER and I didn't have to bother with the clothespins. BUT if you don't have a hot glue gun, Elmer's is fine. 

After the glue has dried, remove the clothespins.

Then, spread Mod Podge all over the inside and outside of the star.

Once it's covered in Mod Podge, cover it in glitter. 

After glitterizing it, set it somewhere to dry. (should take anywhere from 20-45 mins depending on how thick you put the Mod Podge on.) 

DRY, you bastards, DRY!

After it is dry, add a piece of string or an ornament hook and you've got yourself a pretty, sparkly new ornament!

Have fun! 

Woo hoo! Christmas is coming!

Well, I have finally cleared our local Home Depot out of their 16 cent off-white ceramic tiles. Shane ran in to pick some up for me the other day and came out with a box full and said "This is all they have left..." Looks like it's time to re-stock, Home Depot!! 

I have been sequestering myself in my workspace all week working my butt off making Christmas presents. I have most of them finished and wrapped, so I'm giving myself a break today. 


Also, since my little sister specially requested these, down to the colors, I suppose I can show the coasters I made today... zebra print with pink letters: 

i drew in the black lines with sharpie first, then painted over it.
that made things much, much easier.

Also, I made a set of coasters for my mom to match the colors in her living room: 

Aaaaand a peek at one of the song lyric coasters... 

I'm going to try and work on some Christmas ornaments tonight, so hopefully I'll have a tutorial for you tomorrow as long as nothing else gets in the way! 

Oh, also, Jen at 586 Square Feet sent me this awesome Leslie Hall video that I hadn't seen yet. It cracked me up so I'm sharing it with you! 

 

Have a great weekend! 

Hand-painted Reddit Coasters!

Hey all! Last night I was cranking out more Christmas presents, but I also whipped up a set of Reddit coasters and a couple cute owl coasters for your viewing pleasure. Here you go! :) 

owl #1

owl #2

Reddit alien

NYAN CAT!

fuck yeah.

I will have more to show you later! 
Coming up: Dr. Who coasters & Christmas Ornaments!

Christmas Craziness

Sorry about the lack of posts for the last few days. I've been holed up in my little workshop, and I feel like one of Santa's elves. I can't really post a lot of what I'm working on right now since I want my friends and family to be surprised when they open their gifts, but you'll see them after Christmas. 


Also, Shane and I are going to be going to be going back to my hometown again for Christmas so that we can celebrate and exchange gifts and spend time with my family. We're heading out there next Thursday and coming back home on Christmas Eve. I'm just hoping the traffic isn't too ridiculous on Christmas Eve, and that the weather stays as calm as it has been lately. 
It was beautiful outside today!


One thing I CAN post about is the Reddit coasters I'm making tomorrow so stay tuned for those! Also, as soon as we get a chance, Shane's mom is going to teach me how to make Christmas ornaments and we'll have a tutorial for you as well! 


Oh, and a quick story before I completely forget to blog about it... Shane and I were at Wal-Mart the other day and I was cashing my paycheck. We got in line at the customer service counter behind a plump little balding man who was talking very excitedly and waving this DVD in the air: 

 He got my attention, so I started listening to what he was saying and he was ranting and raving about the plot of the movie. Basically, it's a quadruple feature, 4 films in one. Here's what I got off Wikipedia, to save you the expletives and ravings from this weird old man. 

So, as you can imagine, when this man is waving this ridiculous DVD around, yelling about "The Gays"(his words, not mine.), Werewolves, Zombies, and Hitler I'm going to start cracking the fuck up. I lost my shit. I almost got the kid working customer service that had to get yelled at in trouble because he started laughing too. Finally he assured the man he would do something about getting that movie off the Children's dvd shelf. Made my day. 


Oh, and Happy Freakin' BIRTHDAY to my Dad and my friend Cathy today! 


More crafts soon! 
xoxo, Meagan. 

Coasters, coasters, coasters!

A couple of days ago, my friend Brittany reminded me of these DIY coasters that I have been planning on doing for a little while now. Yesterday I went out to Home Depot and got some small square tiles (they are SUPER cheap, between about 16 - 60 cents each). 

I did 4 different sets. 

The first set I turned into movie quote coasters. All I used was Dimensional Paint (the puffy fabric paint stuff that comes in the little squeeze bottles). I had to let them dry overnight so they're not COMPLETELY finished yet, but all I need to do to finish them is put a layer of spray glaze over them to seal them up, which I'll be doing today.

The second set is R.O.Y.G.B.I.V.-inspired. All I did with these ones was draw on the design with Sharpie and then go over it with Mod Podge to give it a little more dimension and then put a layer of spray glaze over them. (Again, will be finishing that part off today.) 

The third set is my glitter coasters... 

To make the glitter coasters, I used these materials: 

tile, mod podge, glitter, spray glaze.
(also used plastic cup and foam brush for the mod podge!!)

I did the coasters pretty much the same way I did my GLITTER SHOES, by mixing the glitter in with the mod podge, then applying it with a foam brush in thick coats onto the tile. (Let tile dry for about 45 mins. between coats).

this was NOT my final coat, I did one more
VERY thick coat of the mod podge mixture on
top of this.

And again, don't worry about the mod podge being white now, it will dry clear and show off the coaster in all it's glittered glory! 

Here is the finished product, after letting it dry overnight:

The fourth set I did yesterday was my paint chip coasters! I saw this idea on Pinterest and had to try it out, since I love cheap crafts. I picked up a bunch of different colored Behr paint chips at Home Depot while I was buying my tiles. 

To make the paint chip coasters, I used these materials: 

mod podge, spray adhesive, scissors, tile, paint chips.
you can go with or without the ruler, i went without.

trace or measure out your square on the paint chip. 

cut out the square....

spray adhesive on the back of the paint chip card,
then press firmly onto the tile. make sure it's centered,
and all edges are pressed down. 

after adhesive is dry (just takes a few minutes),
brush about 3 coats of mod podge onto the coasters
and around the edges of the tile, just to seal it up. 

finished set! 

As you know, while I wait for things to dry, I work on other projects. Last night I jazzed up a cute little box I bought for a couple bucks at Michaels. 

There was an inset square on the lid, so I decided to use some more of that striped tissue paper I used on the glass votive in my previous post...here's what I did step-by-step. 

Painted the box with two coats of orange acrylic paint.

Cut out tissue paper to match the measurements of the square on the lid

Sprayed adhesive onto where I wanted the tissue paper

Pressed the tissue paper onto it

Let it dry (give it a few minutes) 

3 coats of Mod Podge to the tissue paper

1 coat of enamel gloss to the orange painted parts

After all that crafting last night, I came out of the garage (my workspace) to find out it had snowed finally! Very lightly, of course, but hey, snow is snow. 

Oh, and I finally got a picture of my Skyrim character. Not the greatest picture quality, but still pretty awesome, no? 

That's all for today, have fun with this cheap craft idea!